Ride Rite, Sport-Rite & Coil-Rite Products

Suspension
Air Accessory Systems
Air_Components
Service Parts
 

The Complete Suspension Solution

Ride-Rite™
Air Helper Springs mount between the frame and
the suspension. The heavy duty convoluted air
springs will handle your leveling needs, side-to-side and front-to-rear, with load carrying capacities between *3200 - 5000 lbs per set. Installation of many Ride-Rite air helper kits require no drilling.  
2299 Shown

Coil-Rite™
Air Helper Springs mount inside an existing open coil spring suspension.
These air springs allow for adjustable spring rates far superior to the standard coil spring while providing side-to-side and front-to-rear leveling. The durable polyurethane air springs will support 500 - 1000 lbs per set. Installation of most Coil-Rite air helper kits do not require drilling.  
4101 Shown

Custom System
Components allow you to achieve the ultimate low while slamming your custom street rod or truck. Firestone air
helper springs give you the durability of the World’s Number 1 Air Spring. Firestone has enlisted some of the great leaders in custom suspensions to provide you with the air springs and accessories, as well as their wealth of knowledge and experience to satisfy all your
custom suspension needs.
 

Sport-Rite™
Air Helper Springs are
the answer to most of your sport performance needs.
These air springs mount between the frame and the suspension, utilizing a state of the art tapered air spring. Sport-Rite air helper kits enhance the ride while loaded, yet maintain original ride quality while empty. The tapered style air spring will support up to *3000 lbs per set.  
2320 Shown
 

Air-Rite™
air accessory systems
provide instant control
of the air helper springs from within the vehicle. Air-Rite systems allow
quick inflation and deflation for various road and load conditions. Firestone has all of your air inflation needs covered with a multitude of different Air-Rite accessory systems.
2168 Shown

IntelliRide™
Systems provide multiple height control and automatic leveling using an Electronic Control Unit (ECU). The ECU interacts with a height sensor, valve block and high flow compressor to provide three user-programmed heights. Intelli-Ride provides the latest technology in electronic leveling.

Ride-Rite Basic Kit includes:
Everything is included for a quick, easy
installation. Brackets, air springs, hardware, air line, and separate valves for manual inflation. Optional air accessories are available for all applications.  Average installation time is approximately 1-2 hours.
 

Sport-Rite Basic Kit includes:
Everything is included for a quick, easy
installation. Brackets, air springs, hardware, air line, and separate valves for manual inflation. Optional air accessories are available for all applications.  Average installation time is approximately 1-2 hours.

Coil-Rite Basic Kit includes:
Everything is included for a quick, easy
installation. Brackets, air springs, hardware, air line, and separate valves for manual inflation. Optional air accessories are available for all applications.  Average installation time is approximately 1hour.

Air-Rite Basic Kit includes:  Everything
to connect directly to your air
helper springs. Compressor, gauge, air line,
fittings & fasteners.
 

Air Spring & Damper Kits includes:
Fully shielded, reversible sleeve air spring featuring billet aluminum piston and stone shield; High-performance, Bilstein, monotube shock-absorbers; Polyurethane bushings; All installation hardware; Detailed instructions. Optional air accessories are available for all applications.  Average
installation time is less than 1-hour.
 

Air Accessory Systems

Continuously monitor your air helper springs with the air pressure
monitor kit. Can be installed on any air spring system. Complete with gauge, bracket, and all necessary installation hardware.
Gauge Type:  Monitor Only
Part Number:  2196
 

The Digital Air Command utilizes a standard duty compressor and features a digital gauge to allow equal inflation of both springs. The digital gauge panel has been designed to integrate seamlessly with the design of modern dashboard environments.
Gauge Type:  Digital
Part Number:  2415
 

The Remote Fill Station offers an on-board air source for inflating air springs, tires and other pneumatic components. Kit includes a heavy duty compressor (9210/9335), 3 gallon air tank and a 25' extension hose with inflation wand (2311).
Gauge Type:  Dial Gauge & Inflation Wand
Part Number:  2239

The Level Command II utilizes a standard duty compressor (9284)
and a single gauge (2229).This system provides equal inflation of both air springs.
Gauge Type:  Single White Face
Part Number:  2158
 

The Dual Electric Air Command provides front-to-rear or side-to-side
leveling through the use of an electric switch, dual gauge (2260) and standard duty compressor (9284). Inflates each spring individually (two air springs).
Gauge Type:  Dual White Face
Part Number:  2178
 

The Remote Air Command I provides an instant air source, using the (9284) compressor, for any air helper spring system, leveling the vehicle remotely from up to 50 ft. away. No air line to route
through the firewall, no gauges or switches to mount on the dash, compact design for easy installation.
Gauge Type:  No Gauge
Part Number:  2334
 

The Remote Air Command Kit II is the same as the Remote Air Command I above, but utilizes a heavy duty compressor (9285)
.Gauge Type:  No Gauge
Part Number:  2340
 

The Level Command kit provides fingertip control of your air
springs using a heavy duty compressor (9210). 2097 provides
equal inflation of both air springs.
Gauge Type:  Single White Face
Part Number:  2097

The Level Command II kit provides fingertip control of your air
springs using a heavy duty compressor (9210/9335). 2219
provides individual inflation or each air spring (two air springs).
Gauge Type:  Dual White Face
Part Number:  2219
 

The Dual Air Command II provides front-to-rear or side-to-side leveling through the use of a dual gauge (2241), heavy duty
compressor (9285) and 1/2 gallon air tank (9124). Inflates each air spring individually. (two air springs)
Gauge Type:  Dual White Face
Part Number:  2168
 

The Dual Air Command III provides front-to-rear or side-to-side leveling through the use of a dual gauge (2241), super heavy
duty compressor (9285) and one gallon air tank (9125). Inflates each air spring individually. (two air springs)
Gauge Type:  Dual White Face
Part Number:  2198

The air command provides an on-board air source for the Firestone air helper springs and other pneumatic components using our heavy duty compressor (9285),1/2 (9124) or 1 gallon (9125) air tank and a 25' extension hose. This system can be used with both Automatic Air Command systems.
Tank Size:  1/2 Gallon/1 Gallon
Part Number:  2047/2232


 

The single automatic air command (2186) inflates both air
springs equally through the use of a height control valve. The dual automatic air command (2017) inflates both air springs
individually through the use of two height control valves mounted between the chassis and suspension.
Leveling Valves:  Two
Part Number:  2186/2017
 

The single electronic air command inflates both air springs, using a (9285) compressor, equally through the use of a height control sensor mounted between the chassis and suspension.
Leveling Valves:  One
Part Number:  2332

Air Components

Pneumatic (use with tank)
Electric (use without tank)
Gauge Type:  Single White Face
Part Number:  2225/2229
 

Pneumatic (use with tank) 
Electric (use without tank)
Gauge Type:  Single Black Face
Part Number:  2149/2191
 

Pneumatic (use with tank)  
Electric (use without tank)
Gauge Type:  Dual White Face
Part Number:  2241/2260
 

Pneumatic (use with tank) 
Electric (use without tank)
Gauge Type:  Dual Black Face
Part Number:  2145/2188
 

These gauge panels are plumbed with 1/4" air line and feature four electronic rocker switches with dual twin needle gauges in
a brushed stainless steel panel for under the dash mounting. These control panels will work with any solenoid system. (Dual Black Face 2297 Dual White Face 2298)
Gauge Type:  Dual Black White Face
Part Number:  2297/2298

 

This pneumatic control panel is ideal for motor-homes and commercial vehicles. Complete with four pneumatic switches, dual twin needle gauges, and a steel mounting bracket. This
control panel will work with any pneumatic system utilizing a reservoir tank.
Gauge Type:  Dual Black Face
Part Number:  2333

Rapid Response System -2283/
Rapid Response System II -2343
(Same as 2283 except for 3/8” valve block for faster
response time.)
Part Number:  2283/2343
 

*1.5” Pressure Gauge: (master pack of 12) Ultra compact,
easy to use and store- 9992
*2” Pressure Gauge: (master pack of 12) Built in bleeder valve, accurate to within 1% -9993
*2.5” Pressure Gauge: (packed individually) Flexible 12” air line hose with swirl chuck, built in bleeder valve, accurate to within 1%, protective black rubber gauge boot, convenient storage pouch-9994
Firestone’s multi-purpose air gauges allow the customer to easily check air spring
Part Number:  9992/9993/9994
 

Standard Duty Air Compressor (Not for use with air tanks)
Maximum Air Pressure:  120 PSI
(8.3 BAR)
Duty Cycle:  9%
Amperage Draw:  11 AMPS
CFM @ 60 PSI:  0.41
CFM @ 100 PSI:  0.32
Part Number:  9283

Standard Duty Air Compressor (Up to 1 gallon tank)

Maximum Air Pressure:  130 PSI
(9.0 BAR)
Duty Cycle:  15%
Amperage Draw:  18 AMPS
CFM @ 60 PSI:  0.64
CFM @ 100 PSI:  0.57
Part Number:  9284
 

Heavy Duty Air Compressor (Up to 3 gallon tank)

Maximum Air Pressure:  145 PSI
(10.0 BAR)
Duty Cycle:  35%
Amperage Draw:  17 AMPS
CFM @ 60 PSI:  0.73
CFM @ 100 PSI:  0.57
Part Number:  9210/9335

Super Heavy Duty Air Compressor (Up to 5 gallon tank)
Maximum Air Pressure:  150 PSI
(8.3 BAR)
Duty Cycle:  30%
Amperage Draw:  15 AMPS
CFM @ 60 PSI:  0.92
CFM @ 100 PSI:  0.74
Part Number:  9285

Super Heavy Duty Air Compressor (Up to 5 gallon tank)
Maximum Air Pressure:  150 PSI
(8.3 BAR)
Duty Cycle:  35%
Amperage Draw:  18 AMPS
CFM @ 60 PSI:  0.77
CFM @ 100 PSI:  0.62
Part Number:  9230
 

High Duty Air Compressor (Up to 5 gallon tank)

Maximum Air Pressure:  120 PSI
(8.3 BAR)
Duty Cycle:  70%
Amperage Draw:  15 AMPS
CFM @ 60 PSI:  0.70
CFM @ 100 PSI:  0.43
Part Number:  9270
 

Ultimate Duty Air Compressor (Up to 6 gallon tank)

Maximum Air Pressure:  100 PSI
(6.9 BAR)
Duty Cycle:  100%
Amperage Draw:  26AMPS
CFM @ 60 PSI:  1.25
CFM @ 100 PSI:  0.95
Part Number:  9164
 

Inflation Station I
* Heavy duty canvas carrying case
*8' power cable with battery clips
*Two blower nozzles and an inflation needle
*Inflates a 31" x 10.5" tire in 4 min. 15 sec.
*25' coiled inflation hose
*Tire inflator with gauge
*Weighs 7.25 lbs.
*1.02 CFM @ 60 PSI (20% Duty Cycle)
*0.81 CFM @ 100 PSI (150 PSI Max)
Part Number:  9290
 

Inflation Station II
*Heavy duty canvas carrying case
*8' power cable with heavy duty brass battery clips
*Two blower nozzles and an inflation needle
*Inflates a 31” x 10.5” tire in 4 min.
*25' coiled inflation hose
*Tire inflator with gauge
*Replacement filters included
*Sealed for moisture/dust resistance
*1.69 CFM @ 60 PSI (35% Duty Cycle)
*1.34 CFM @ 100 PSI (150 PSI Max)
Part Number:  9289
 

Air Spring Spacer-
Lift spacers can be used with most Ride-Rite air helper spring kits -NOT Coil-Rite or Sport-Rite. In order to ensure proper spacer usage, determine the distance between the upper and lower brackets of your air helper spring kit whether the kit mounts on the leaf spring or the axle.
Contact us for more information.

Lifted Applications-
The lifted and lowered vehicle applications come complete with the necessary brackets, air springs, fittings and inflation valves for manual inflation.
Contact us for more information.

 

Lowered Applications-
Minimum Tire to Frame clearance requirements:  = 7.50"
Contact us for more information.

1/4 Gallon Air Tank:

Two 1/4 NPT Ports
Part Number:  9166

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

1/2 Gallon Air Tank:

Two 1/4 NPT Ports
Part Number:  9124

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

1 Gallon Air Tank:

Two 1/4 NPT Ports
Part Number:  9125

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

1 Gallon Air Tank:

Four 1/4 NPT Ports
Part Number:  9244

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

2 Gallon Air Tank:

Two 1/4 NPT Ports
Part Number:  9126

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

3 Gallon Air Tank:

Two 1/4 NPT Ports
Part Number:  9127

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

3 Gallon Air Tank:
Two 1/4 NPT Ports on either end & 1/4 NPT on bottom

Part Number:  9148

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

3 Gallon Air Tank:
Two 1/8 NPT
Ports Offset on one end & One 1/8 NPT on other end
Part Number:  9150

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

3 Gallon Air Tank:
Two 1/4 NPT Ports offset on one end & One 1/4 NPT on
other end
Part Number:  9154

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

3 Gallon Air Tank:
Two 1/4 NPT Ports offset on one end & One 1/4 NPT on
other end & Two 1/4 NPT top & bottom
Part Number:  9227

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

3 Gallon Air Tank:

Two 3/8 NPT Ports
Part Number:  9229


These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

3 Gallon Air Tank:
One 1/4 NPT Port on one end & One 1/4 &
1/8 NPT Ports on other end
Part Number:  9245

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.

5 Gallon Air Tank:

Two 1/4 NPT Ports

Part Number:  9191

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

5 Gallon Air Tank:
One 1/4 NPT Port on one end & One 1/4 &
1/8 NPT Ports on other end
Part Number:  9228

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

5 Gallon Air Tank:

Two 3/8 NPT Ports

Part Number:  9231

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

5 Gallon Air Tank:

10 Ports

Part Number:  9242

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

5 Gallon Air Tank:

9 Ports

Part Number:  9243

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

5 Gallon Air Tank:

5 Ports

Part Number:  9246

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

5 Gallon Air Tank:

7 Ports

Part Number:  9248

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

20 Gallon Air Tank:

5 Ports

Part Number:  9277

These air tanks are coated internally and externally to resist corrosion. They are tested to SAE J10 compliance and capable of 150 psi maximum pressure.
 

Service Parts

Dealer Fitting Pack 1:
Includes 4 each: 1/4" Union Tees, Inflation Valves, 1/4 NPT Elbow Fittings
Part Number:  2359
 

Dealer Fitting Pack 2:
Includes 4 each: 1/4" Union Tees, Inflation Valves, 1/4 NPT Elbow Fittings and 2 each: 1/4" Unions, 1/4
NPT Straight Fittings
Part Number:  2360
 

Dealer Fitting Pack 3:
Includes 6 each: 1/4" NPT Elbow Fittings,
Inflation Valves, 2 each: Union Tees, 1/4 NPT Straight Fittings, Union Fittings. Also Includes 100' of Air Line Tubing
Part Number:  2395
 

Ride-Rite / Sport-Rite Air Line Service Kit-2012:
Includes 18' of red 1/4" air line, two 1/4" NPT elbow fitting, one union tee, and two inflation valves
Part Number:  2012
 

Coil-Rite Air Line Service Kit-2131:
Includes 18' of blue 1/4" air line with attached elbow fittings, two inflation valves,
tie wraps, and fasteners
Part Number:  2131

Air Line Tubing

Air Line Tubing
 

UNION TEE
(Packages of 25)

1/4" TUBING  Part Number:  3025
3/8" TUBING  Part Number:  3105
1/2" TUBING  Part Number:  3158

MALE BRANCH SWIVEL TEE
(Packages of 25)
1/4" TUBING
     1/8 NPT  Part Number:  3047
     1/4 NPT  Part Number:  3273
3/8”TUBING
     1/4 NPT  Part Number:  3279
     3/8 NPT  Part Number:  3280
1/2" TUBING
     1/4 NPT  Part Number:  3286
     3/8 NPT  Part Number:  3287
 

COMPRESSOR TEE
(Packaged individually)


1/4" TUBING
1/8 NPT  Part Number:  3066
 

MALE ELBOW
(Packages of 25)


1/4" TUBING
     1/8 NPT  Part Number:  3128
     1/4 NPT  Part Number:  3031
3/8”TUBING
     1/4 NPT  Part Number:  3103
     3/8 NPT  Part Number:  3153
1/2" TUBING
     1/4 NPT  Part Number:  3289
     3/8 NPT  Part Number:  3290

MALE CONNECTOR
(Packages of 25)


1/4" TUBING
     1/8 NPT  Part Number:  3055
     1/4 NPT  Part Number:  3046
     3/8 NPT  Part Number:  3267
3/8" TUBING
     1/8 NPT  Part Number:  3277
     1/4 NPT  Part Number:  3104
     3/8 NPT  Part Number:  3154
     1/2 NPT  Part Number:  3278
1/2" TUBING
     1/4 NPT  Part Number:  3284
     3/8 NPT  Part Number:  3285
     1/2 NPT  Part Number:  3157

INFLATION VALVE
(Packages of 25)


1/4" TUBING  Part Number:  3032

PRESSURE SWITCH
(Packaged individually)


1/8”NPT MALE
90-120 PSI  Part Number:  9016
100-150 PSI  Part Number:  9193

STRAIGHT FEMALE
(Packages of 10)


1/8 NPT  Part Number:  3082
1/4 NPT  Part Number:  3083

COMPRESSOR CHECK VALVE
(Packages of 25)

1/8” NPT MALE/FEMALE  
Part Number:  9311
 

UNION
(Packages of 10)


1/4" TUBING  Part Number:  3079
1/4" - 3/8" TUBING 
Part Number:  3114